VEGA VVO VEGA Visual Operating - Manual (Page 27)

VEGA Visual Operating 27
Set-up of a signal conditioning instrument VEGAMET 614
On signal conditioning instruments with
two sensor inputs (VEGAMET 515,
515V) you can click to
Sensor coordi-
nation and coordinate the sensors to
the inputs. On all VEGAMET with only
one input, this step is not necessary.
Click to
Continue >>.
Already in this window you can click
to
OK. Then the new measurement
loop is created. You can now carry
out further adjustments by clicking
to
Level.
Here you can modify the measure-
ment loop name TAG-No. 1 (ap-
pears on the display of VEGAMET).
In addition you can enter a meas-
urement loop description (this de-
scription appears in different
VVO-windows). In addition you can
coordinate to the measurement loop
(TAG-No. 1) the outputs of VEGAMET,
e.g. the
VEGADIS-output.
You see that DISBUS-output 1 is already
coordinated to measurement loop TAG-
No. 1. By clicking to
<< this coordination
is cancelled. A further DISBUS-output
can be coordinated by choosing (click-
ing) and clicking to
>>. With OK you
save and terminate the activity "Create
new measurement loop“.