VEGA VVO VEGA Visual Operating - Manual (Page 39)

VEGA Visual Operating 39
Establishing of a linked measurement loop with VEGAMET 515V
Click to
OK.
Now you see that the two sensors are
"not configured“. This means that the
sensors are not yet coordinated to the
inputs of VEGAMET 515. Click to
Sen-
sor coordination.
Confirm with
Yes.
Choose in the window sensor coordination
input 1 (if not already chosen), then click to
Input.
Choose the sensor (serial number) which you
want to coordinate to input 1 and confirm with
OK. You reach again the window "Sensor
coordination“.