GLOBALSAT TR-206 - Manual (Page 43)

42
except Off mode
C1
The time for starting to get
GPS fix before the next report
time if TR-206 does not get
GPS fix in last report, or got
GPS fix for 1 hour ago
u16, in
seconds
60 ~ 600
Note: TR-206 will send out the
report whether it gets GPS fix
or not when C1 time ends.
C2
The time for starting to get
GPS fix before the next report
time if TR-206 got GPS fix
within 1 hour
u16, in
seconds
10 ~ 120
Note: TR-206 will send out the
report whether it gets GPS fix
or not when C2 time ends.
C3
GPS fix time before sending
out the first report
u16, in
seconds
0 ~ 600
If "C3"=0, disable first report
message.
C7 Choose to use C8 or C9+CA 1/0
0=use C8
1=use C9+CA
Applicable for standby,
periodic and on-line mode
C8
Interval for starting to get GPS
fix
u16, in
seconds
0 ~ 65535
Applicable if C7=0
C9
Interval for starting to get GPS
fix when speed is lower than 10
KM/H
u16, in
seconds
0 ~ 65535
Applicable if C7=1 and
speed<10 Km/H
CA
Interval for starting to get GPS
fix when speed is higher than
10 KM/H
u32
0 ~ 4 Giga
Applicable if C7=1 and
speed>=10 Km/H
You have to take the value to
divide the speed to get the
interval. For example, if you
set the value as 54000 and
the speed is 60 KM/H. The
interval will be 5400/60=900
seconds
RH GPS always on in moving state 1/0
0=disable
1=enable
C1 example, the next report time is 10:00:00 AM and TR-206 does not get GPS fix in
last report, C1 is 180 seconds. TR-206 will start to get GPS fix at 9:57:00 AM and
send out report at 10:00:00