Banks Power Dodge Trucks: (Diesel ’98 - 02 5.9L Cummins ISB) Speed Control- Banks Exhaust Brake - Manual (Page 3)

9 6 9 8 3 v . 1 2 . 0
|3
General Installation Practices
1.
For ease of installation
of your Banks Brake, please
read this
16 -page Owner’s
Manual before starting any
work. Become thoroughly
familiar with all components
and phases of the installation
before beginning any work.
2.
Inspect all components
supplied for any foreign
material that may have
entered during shipping and
handling.
3.
Pay particular attention
to the routing of wires and
hoses. Keep them away from
exhaust heat, moving parts
and sharp edges that may
cause cuts or other damage.
Route or tie away from critical
areas as required. Keep all
wires a minimum of 6” from
hot exhaust parts, 8” or more
is recommended whenever
possible.
warning! never work under
any vehicle supported only
by a jack of any kind. Do
not usE concrete blocks or
other masonry items that
may collapse under the
vehicle weight.
Dear Customer,
Your new Banks Brake
is a uniquely designed
exhaust brake with
electronic controls,
designed to achieve the
optimum level of braking
from your vehicle’s
engine.
If you have any
questions concerning
the installation of the
Banks Brake, please call
our Technical Service
Hotline at (888) 839-2700
between 7:00 am and
5:00 pm (PT). If you have
any questions relating to
shipping or billing, please
contact our customer
Service Department at
(888) 839-5600.
Thank you.
3 |
9 6 9 8 3 v . 1 2 . 0