Banks Power Jeep Trucks: (Gas ’12 - 14 3.6L) Exhaust- Monster Exhaust, Single out the back 2012 3.6L Wrangler 2-door - Manual (Page 7)

96501 v.1.0
7
11.
Remove the protective covering
from the tailpipe tip.
Caution: the protective covering
may ignite and burn if not removed
prior to running the engine.
12.
Your system includes two
(2) Banks Power logos designed
to complement the vehicle’s
front fenders. See Figure 6 for
recommended logo placement.
13.
Re-connect the negative battery
cable. Start the engine and listen for
exhaust leaks. Tighten the exhaust
clamps as necessary. Whenever
possible, tack welding slip connections
to prevent disengagement is
recommended.
14.
The Banks Monster Exhaust
installation is now complete.
Figure 5