Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- Banks Navigation For use with Banks iQ - Manual (Page 18)

18
96838 v.1.0
In the main map display, tap on the
map where you would like to set
your origin. once you have selected
your starting point on the map, tap
on the ‘Menu’ button. Then press
the ‘Settings’ button. Press the ‘Set
origin’ button in the Settings menu.
Press ‘ok’ to set the location you pick
as the origin. Pressing ‘oK’ will direct
you back to the main map display and
show you the origin you selected.
Demo Mode
The Demo mode may be used to
preview a route you have selected or
it will generate a random one. This
function may be used to preview a
route and make changes as needed.
Press the ‘Demo’ button in the
Settings menu. In the Demo Screen tap
on the ‘Demo Mode off’ button to turn
on the Demo mode. Press it again to
turn it off. once you have made your
selection tap ‘ok’ to direct you back to
the main map display. The Demo mode
will run your current route and display
the turn-by-turn direction.
To stop the Demo, tap the ‘Menu’
button in the main map display. Then
tap on the ‘Settings’ button to open
the Settings Menu. Press on the
‘Demo’ button and press ‘Demo Mode
on’ to turn off the Demo mode. Press
‘ok’ to direct back to the main map
display. about
The About screen displays the current
version and copyright information.
You may also reset the navigation
program back to the factory settings
by pressing the ‘Factory Reset’ button
in the lower right corner.
Press the ‘About’ button in the
Settings menu. Review the information
and press the ‘X’ in the upper right
corner to return to the Settings Menu
or press the ‘Factory Reset’ button to
reset the navigation program.
WaRNiNG: Resetting the
navigation program to the
factory setting will delete all
stored data
Manage favorites
Please refer to ‘Managing Favorites in
the Touch-n-go page’ in this section
for instruction.
EXiT
To Exit the navigation program and
to return to the Environment Select
menu. Press the ‘Exit’ button in the
Settings menu. Press ‘Exit’ again when
prompt to do so to confirm.
-EnD, SEcTIon 5-