Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Interface- Banks Navigation For use with Banks iQ - Manual (Page 10)

10
96838 v.1.0
You may set a destination by entering
an Address, selecting a Point of
Interest, a cross Road, or a set
Favorite Destination.
To set a Destination Using an
address
1.
Tap the ‘Menu’ button in the main
map display screen.
2.
Tap on the ‘Where To?’ button in
the Menu select screen. See figure 6.
3.
Tap on the ‘Address’ tab in the Enter
Destination screen. See figure 10.
4.
choose between entering the
address starting with the city name,
the address by street first, or by going
to the city center you choose.
5.
Follow the prompts to set a
destination after you have made a
selection. The navigation program will
display the destination location.
6.
Press ‘Go’ and the voice instruction
will guide you to your destination
while the screen displays your present
location and Turn-By-Turn information.
To set a Destination Using a Point
of interest (Poi)
1.
Tap the ‘Menu’ button in the main
map display screen.
2.
Tap on the ‘Where To?’ button in
the Menu select screen.
3.
Tap on the ‘PoI’ tab in the Enter
Destination screen. See figure 11.
4.
choose between PoI near vehicle,
PoI by city, PoI by name, or PoI near
Dest (Destination).
5.
Follow the prompts to set a
destination after you have made a
selection. The navigation program will
display the destination location.
6.
Press ‘Go’ and the voice instruction
will guide you to your destination
while the screen displays your present
location and Turn-By-Turn information.
section 4
To sET a DEsTiNaTioN
Figure 10