Notice to installer – Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Powertrain- Banks Billet Torque Converter '03-07 User Manual
Page 5
96799 v.2.0
5
Tools Required:
•
3
⁄
8
” and
1
⁄
2
” drive ratchets with
metric sockets including
1
⁄
2
” and
3
⁄
8
”
drive extension
• Metric box-end wrenches
• Standard and Phillips head
screwdrivers
• Standard and needle-nose pliers
• Clean shop towels or rags
• Transmission hoist
• Floor jack
• Drain pan
• 320-400 grit sandpaper
• Measuring ruler
• Pry bar or channel lock pliers
• Grease pen
• Foot-pound torque wrenches
• Transgel Grease
Highly recommended tools and
supplies:
• Flywheel rotating tool
• Penetrating oil or light lubricant
spray
• For 4x4 models: Second
transmission hoist
• Transmission hoist adapter
• Torque converter holding tool
• Transmission fluid filters
• Transmission pan gasket
Notice To Installer:
Banks recommends replacing your
transmission fluid, transmission fluid
filters, and transmission pan gasket.
Failure to service transmission
fluid may result in torque converter
damage.