Ottomind6 tuner icon – Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Power Systems- PowerPack & Stinger w EconoMind ('03-07) Compatible w_ Optional PowerPDA User Manual

Page 36

Advertising
background image

36

96811 v.10.0

using The Banks PowerPDA

Vehicle Command Center
check the Banks PowerPDA’s

Status Indicator for the “OK” icon.

Any OttoMind6 Tuner fault will be

indicated by the “Banks Engine” icon

(see Figure 52) and its cause can

be investigated by going to the ‘Self

Diagnostics’ screen and scrolling

through the list of logged tuner

events.

1.

Press the center button on the

5- way navigator to take you to the

System Menu screen.

2.

Touch the button labeled ‘More>’

to move to the second screen of the

System Menu.

3.

Next, touch the ‘Self Diagnostics’

button. (See Figure 53)

4.

The ‘Self Diagnostics’ screen

displays a log of diagnostic events

related to the OttoMind6 tuner (See

Figure 54). The ‘Logged Events’ list

takes a moment to update each time

this screen is opened (as indicated

by a slight flickering of the list). Once

the list is updated, the most current

event will appear at the top of the

list. Each event has an associated

timestamp and description, which

will be displayed below the list when

that event is highlighted. Each key

cycle of the vehicle produces a

minimum of two logged events.

5.

Touch the button labeled ‘Down’

to scroll down through the recorded

events.

6.

Touch the button labeled ‘Up’

to scroll up through the recorded

events.

7.

Touch the ‘Back’ button to return

to the System Monitor screen.
Diagnosing OttoMind6 error

codes without the PowerPDA.
If you feel that your Banks OttoMind6

Diesel Tuner is not functioning

properly, some diagnostics can be

performed. Your OttoMind6 Diesel

Tuner is equipped with diagnostic

features that will detect and display

certain errors.
Remove the Banks OttoMind6 Diesel

Tuner from its mounting location

while keeping all connectors plugged

in, and position it in such a way

that you can view the top of the

OttoMind6 housing that contains the

LEDs . Turn the vehicle key to the

ON position. Observe the two LEDs

mounted on the end of the Banks

OttoMind6 Diesel Tuner:
• A steady GREEN LED will illuminate

if all wire connections are correct,

the engine is running, and the engine

coolant temperature is within its

normal operating range.
• The GREEN LED will flash if all wire

connections are correct, the engine

is running, but the engine coolant

temperature is not within its normal

operating range. The GREEN LED will

stop flashing once the engine coolant

temperature is within its normal

operating range.

• No LEDs will illuminate if the fuse

on the OttoMind6 wiring harness is

blown or the wiring harness is not

properly connected. If the fuse and

all connections are okay, contact

Banks Technical Service.
• The RED LED will flash in a certain

sequence if a connection is incorrect

of if there is a problem with the

system – this sequence will identify

one or more diagnostic codes. A

Banks OttoMind6 Diesel Tuner’s

diagnostic code is comprised of 2

digits. Each code is expressed in a

sequence of 2 sets of the flashing

red LED separated by a brief flashing

of the green LED in between. Each

set of a number of red LED flashes

represents a digit. A longer flashing

of the green LED separates the

sequences. The LEDs will continue

to flash to display all the errors,

and then repeat. Table 1 lists the

common diagnostic codes. For

example, if a faulty thermocouple

is detected (code “2,3”) by the

Banks OttoMind6 Diesel Tuner, the

following red and green LED flashing

sequence is observed when the key

is on:
(1) Two times flashing RED LED
(2) One time quick flashing GREEN

LED
(3) Three times flashing RED LED
(4) One time longer flashing GREEN

LED
The above flashing sequence will

repeat continuously. When the

problem is corrected, the diagnostic

code will be eliminated and replaced

by a steady green light.
NOTE: If multiple codes are set,

they will be displayed in a series

separated by the longer flashing

green LED. When reading codes,

make sure to watch the entire series

until you see the first code repeat.

-END, SEcTION 9-

Section 9

TROuBLESHOOTING, OTTOMIND6

Figure 53

Figure 54

Figure 52

OttOMind6

tUnER icOn

Advertising