Banks Power Dodge Trucks: (Diesel ’03 - 07 5.9L Cummins) Tuner- Six-Gun Diesel Tuner, (325 HP Dodge 5.9L Cummins (24-valve) Trucks) '06-07 Compatible with Optional PowerPDA User Manual

Page 28

Advertising
background image

28

96810 v.7.0

Your Six-Gun Diesel Tuner displays

the “4,3” diagnostic code (refer to

TROUBLESHOOTING in Section 8 on

how to read codes) when it needs to

learn your transmission configuration.

This always occurs when the Six-

Gun Diesel Tuner is first installed on

the truck. The Six-Gun Diesel Tuner

is equipped with advanced safety

features to preserve your automatic

transmission. One of them is the

capability to detect the occurrence

of transmission slip, and it will

automatically de-rate the engine

output power accordingly.
Before this safety feature can take

effect, the Six-Gun Diesel Tuner needs

to learn that your truck is equipped

with an automatic transmission.

(Please read the “Disclaimer of

Liability” on page 2.)

1.

The following driving test shall

be performed in an area where

speeds over 55mph are legal, safe

and traffic is light. For a vehicle with

a manual transmission, follow Step

2. For a vehicle with an automatic

transmission, follow Step 3. While

driving, listen for any exhaust leaks or

rattles, or intake boost leaks. After the

engine cools, re-tighten clamps and

hoses if leaks are detected.

2.

(Manual trans) To teach the Six-

Gun Diesel Tuner that your truck is

equipped with a manual transmission

drive the truck at a speed over 55

mph for at least 2 minutes. The “4,3”

diagnostic code will be eliminated.

Repeat if necessary to eliminate code.

Proceed to Section 7.

3.

(Auto Trans) To teach the Six-

Gun Diesel Tuner that your truck

is equipped with an automatic

transmission drive the truck at a speed

over 55mph until the torque converter

is locked (the torque converter is

usually locked at speeds over 55mph).

With the torque converter locked and

with turbo boost below 10psig (ie, light

load), maintain the attained speed

steadily for at least 30 seconds. Once

the transmission is learned, the “4,3”

diagnostic code will be eliminated.

Repeat if necessary to eliminate code.

-END, SECTION 5-

Section 5

TRANSMISSION LEARNING

Advertising