Banks Power Dodge Trucks: (Diesel ’03 - 07 5.9L Cummins) Tuner- Six-Gun Diesel Tuner, (325 HP Dodge 5.9L Cummins (24-valve) Trucks) '06-07 Compatible with Optional PowerPDA - Manual (Page 33)

96810 v.7.0
33
Note: If clearing the Six-Gun’s learned
parameters then all PowerPDA tunable
settings will be reset to factory
defaults. (Refer to the PowerPDA
Owners Manual for more detail.)
This procedure should only be
performed if:
- A ”4,2” code for transmission slip
detection is repeatedly set or will
not clear and the transmission is
not actually slipping; or
- The Six-Gun Diesel Tuner is moved
to a new vehicle; or
- The vehicle’s speedometer has
been factory recalibrated for
different gearing or tire size; or
- Instructed to do so by Banks
Technical Staff. Your Six-Gun Diesel
Tuner also has the capability to
clear the information related to the
learned transmission type and gear
ratios. The diagnostic code “4, 3”
will reappear after the procedures
are carried out correctly. Follow
the steps below to unlearn the
transmission on your Six-Gun
Diesel Tuner.
CAUTION: The following procedures
can only be carried out with the
engine not running.
1.
Turn the vehicle key to the ON
position but DO NOT start the engine.
2.
Fully depress the accelerator pedal
and then release it completely. Repeat
for 5 times. The GREEN LED will flash
when this is completed successfully.
3.
Turn the key OFF. Wait 10 seconds,
or until the GREEN LED goes off and
stays off. Turn the key to the ON
position but DO NOT start the engine.
4.
Fully depress the accelerator pedal
and then release it completely. Repeat
for 5 times. The “4,3” diagnostic
code will flash when this is completed
successfully.
Note: When the transmission type
and gear ratios are cleared (with code
“4,3” displayed), the engine power
returns and remains in stock level until
the Six-Gun Diesel tuner re-learns the
transmission and the “4,3” code is
eliminated. Follow the procedures in
”transmission Learning” (Section 6) to
eliminate the “4,3”.
-END, SECTION 8-
Section 8
CLEARING LEARNED INFORMATION
Section 9
Updating Your Banks PowerPDA Software & Banks Six-Gun Diesel Tuner
Firmware
The Banks PowerPDA is designed
such that new software updates
can be easily installed. Check the
BanksPower web site at <http://www.
bankspower.com/downloads> for the
latest version of the Banks PowerPDA
software. Once you have determined
that your Banks PowerPDA should be
updated, follow the instructions on
the page for the appropriate software
update.
The Banks Six-Gun Diesel Tuner is
designed such that new firmware
updates can be easily installed. Check
the BanksPower web site at <http://
www.bankspower.com/downloads> for
the latest version of the Banks Six-Gun
Diesel Tuner firmware. Once you have
determined that your Banks Six-Gun
Diesel Tuner should be updated, follow
the instructions on the page for the ap-
propriate firmware update.
END, SECTION 9-