Banks Power Dodge Trucks: (Diesel ’03 - 07 5.9L Cummins) Tuner- Six-Gun Diesel Tuner, (235, 250, 305 and 325 HP Dodge 5.9L Cummins Trucks (24-valve)) '03-05 Compatible with Optional Banks iQ - Manual (Page 28)

28
96821 v.4.0
Six-Gun Troubleshooting Using The
Banks iQ
Check the Banks iQ’s Status indicator
for the “OK” icon on the upper left
corner of the iQ screen. Any Tuner
fault will be indicated by the “Banks
Engine” icon (see Figure 21) and its
cause can be investigated by running a
‘Tuner Diagnostic’ from the Diagnostic
menu.
1.
In the Environment select menu
press on the ‘Diagnostics’ button. See
Figure 22.
2.
In the Diagnostics menu press on
the ‘Tuner Diagnostics’ button to run a
tuner diagnostics. See Figure 23.
3.
The ‘Self Diagnostic’ screen displays
a log of diagnostic events related to
the Tuner. The ‘Logged Events’ list
takes a moment to update each time
this screen is opened (as indicated
by a slight flickering of the list). Once
the list is updated, the most current
event will appear at the bottom of
the list. Each event has an associated
timestamp and description, which will
be displayed below the list when that
event is highlighted. Each key cycle
of the vehicle produces a minimum
of two logged events. See Figure 24.
Table 1 lists the common diagnostic
codes and the suggested course of
action for each.
4.
Use the arrow buttons to scroll
through the recorded events.
5.
Touch the iQ icon on the lower
left of the screen to return to the
environment screen or the return icon
to return to the Diagnostics menu.
6.
A pop-up “Log-File” screen will
appear asking you if you want to erase
the contents of the log. Press ‘No’ to
keep the contents on Log-file or ‘Yes’,
to erase the Log-files.
Section 7
TROUBLESHOOTING
Figure 21
Banks Engine
Icon
Figure 22