Grain Systems PNEG-1890 - Manual (Page 11)

Chapter 1 Top Dry Air Box Assembly
Install Inner Spout
The inner spout slides onto the support plates located inside the air box under the top spout and is fas-
tened in place with a keeper bolt.
1. Slide flanges of inner spout (A) onto spout support plates (D).
2. Fasten in place with keeper bolt (C).
Callout Part Number Description
A TD-101310 Air Box Inner Spout Weldment
B TD-101155 Air Box Cover Support Frame
C S-277 5/16”-18 X 1–1/4” YDP Grade 5 Bin Bolt
D NA Spout Support Plate
E TD-101313 Air Box Top Spout Weldment
Pneg-1890 Top Dry Air Box 11