Grain Systems PNEG-1890 - Manual (Page 8)

Chapter 1 Top Dry Air Box Assembly
Attach Vent Assembly to Side Plate
Attaching the vent assemblies to the side plates first will allow for easier access to hardware during
installation.
1. Apply caulk (C) along the perimeter of the bolt holes in the side plate (B).
2. Align holes in vent assembly (A) with those in the side plate (B).
3. Fasten vent assembly (A) to side plate (B) using screws (D) and nuts (E).
Callout Part Number Description
A NA Vent Assembly
B TD-101153 Air Box Cover Side Plate
C CH-6873 Silicone caulk area indicated by gray dashed line.
D S-275 5/16”-18 X 3/4” Grade 5 Hex Bolt
E S-396 5/16”-18 Zinc YDP Grade 2 Hex Nut
8 Pneg-1890 Top Dry Air Box