Assemble air box covers – Grain Systems PNEG-1890 User Manual
Page 6
Advertising
Chapter 1 Top Dry Air Box Assembly
Assemble Air Box Covers
The air box covers consist of the air box right and left covers and the air box cover angle plate. This assem-
bly will be the base for the vent assembly.
1. Apply caulk (F) along the bolt holes in both the right side panel (B) and the left side panel (C).
2. Install the right side panel (B) and the left side panel (C) to the angle plate (A) using bolts (D) and
nuts (E).
Callout
Part Number
Description
A
TD-101154
Air Box Cover — Angle Plate
B
TD-101152
Air Box Cover — Right
C
TD-101151
Air Box Cover — Left
D
S-275
5/16”-18 X 3/4” Grade 5 Hex Bolt
E
S-396
5/16”-18 Zinc YDP Grade 2 Hex Nut
F
CH-6873
Silicone caulk area indicated by gray dashed line.
6
Pneg-1890 Top Dry Air Box
Advertising