Grain Systems PNEG-573 - Manual (Page 17)

17
SERIES 2000 DRYER CONTROL PANEL SERIES 2000 DRYER CONTROL PANEL SERIES 2000 DRYER CONTROL PANEL SERIES 2000 DRYER CONTROL PANEL SERIES 2000 DRYER CONTROL PANEL
OFF to the moisture control. The light
beside the switch is illuminated when
the grain column temperature is be-
low the moisture control set point.
DRYER CONTROL PANEL FEATURING THE COMPETITOR DRYER CONTROL PANEL FEATURING THE COMPETITOR DRYER CONTROL PANEL FEATURING THE COMPETITOR DRYER CONTROL PANEL FEATURING THE COMPETITOR DRYER CONTROL PANEL FEATURING THE COMPETITOR
SERIES 2000 CONTROL SYSTEM SERIES 2000 CONTROL SYSTEM SERIES 2000 CONTROL SYSTEM SERIES 2000 CONTROL SYSTEM SERIES 2000 CONTROL SYSTEM
This switch turns the power ON or
MOISTURE CONTROL MOISTURE CONTROL MOISTURE CONTROL MOISTURE CONTROL MOISTURE CONTROL
SWITCH(2) SWITCH(2) SWITCH(2) SWITCH(2) SWITCH(2)
The control panel control panel control panel control panel control panel provides easy
access to gauges and controls. The
Competitor Series 2000 Control
System is a computerized control
system that gives instant information
regarding dryer operation.
DRYING MODE SWITCH(5) DRYING MODE SWITCH(5) DRYING MODE SWITCH(5) DRYING MODE SWITCH(5) DRYING MODE SWITCH(5)
This is used to select staged batch
or continuous flow drying.
Figure 3: The grain dryer control panel. Figure 3: The grain dryer control panel. Figure 3: The grain dryer control panel. Figure 3: The grain dryer control panel. Figure 3: The grain dryer control panel.
The dryer outside light is turned on
or off here. In auto the light turns
off if the dryer has a shutdown.
OUTSIDE LIGHT(4) OUTSIDE LIGHT(4) OUTSIDE LIGHT(4) OUTSIDE LIGHT(4) OUTSIDE LIGHT(4)
CONTROL POWER CONTROL POWER CONTROL POWER CONTROL POWER CONTROL POWER
SWITCH(3) SWITCH(3) SWITCH(3) SWITCH(3) SWITCH(3)
The power to the Competitor 2000
Control System is turned on or off
with this switch.
The Series 2000 Dryer has a built in
moisture control. It controls the
moisture level of discharged grain
by sensing grain column temperature.
MOISTURE CONTROL(1) MOISTURE CONTROL(1) MOISTURE CONTROL(1) MOISTURE CONTROL(1) MOISTURE CONTROL(1)
This is used to select the opera-
tion of the load auger
load auger load auger load auger load auger. In both the
AUTO and MANUAL position the
load auger
load auger load auger load auger load auger will operate if the dryer
is low on grain and will automati-
cally shut off when the dryer is full.
In the AUTO position only, the
dryer will shut down after a preset
period of time set on the OUT OF
GRAIN TIMER.
LOAD AUGER SWITCH(6) LOAD AUGER SWITCH(6) LOAD AUGER SWITCH(6) LOAD AUGER SWITCH(6) LOAD AUGER SWITCH(6)