Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1412 - Manual (Page 12)

12 PNEG-1412 Two Leg Towers
1. Start assembly by taking the 2 bottom columns (STC00348 -5' or STC00349 -10' depending on
height of tower) and attaching Bottom Angle Joint (STC00354) using (4) 1/2" x 1 HHCS bolts and (4)
1/2" hex nuts. (See Figure 1.) Note: Angles go to inside of leg channel.
Assemble Bottom Angle Joints to Columns
1/2" x 1" HHCS Bolts
(S-4492)
1/2" Hex Nut
(S-3729)
Bottom Angle Joint
(STC00354)
Bottom Angle Joint
(STC00354)
Columns
(STC00348 - 10')
or
(STC00349 - 5')
Figure 1
Columns
(STC00348 - 10')
or
(STC00349 - 5')
1/2" Hex Nut
(S-3729)