Safety decals, Chapter 3 safety decals, 3 to 1 ratio – Grain Systems Unload Augers PNEG-1049 User Manual
Page 11: Warning
PNEG-1049 10"-12" Commercial Bin Sweep Augers
11
3. Safety Decals
Check components shown below to ensure that the safety decals are in place and in good condition. If a
decal cannot be easily read for any reason or has been painted over, replace it immediately. Contact your
dealer or the manufacturer to order a replacement decal free of charge.
SHEAR POINT
Keep hands clear of moving
parts. Do not operate with
guard removed. Disconnect
and lockout power before
servicing.
DC-994
SHEAR POINT
Keep hands clear of moving
parts. Do not operate with
guard removed. Disconnect
and lockout power before
servicing.
DC-995
WARNING
KEEP OUT OF BIN WHILE SWEEP IS IN OPERATION
RAPIDLY TRAVELING SWEEP AUGER
FAILURE TO HEED WILL RESULT IN
SERIOUS INJURY OR DEATH
DC-1384
DC-994
Located inside belt guard
DC-1384
Located on shield
DC-995
Located outside belt guard
DC-1512
DC-1760
Located on drive
3 TO 1 RATIO
DC-1760
DC-1512
Located on drive and on belt guard