Assembly, Chapter 4 assembly – Grain Systems Unload Augers PNEG-1049 User Manual
Page 14
Advertising
![background image](/manuals/277800/14/background.png)
14
PNEG-1049 10"-12" Commercial Bin Sweep Augers
4. Assembly
1. Attach the pivot yoke to the drive assembly with two (2) 5/8" x 2" grade 8 hex bolts and nylock nuts.
Figure 4A Pivot to Drive Assembly
2. Remove the two (2) 3/4" x 1-1/4" grade 8 hex bolts and nuts that attach the belt guard mounting
strap to the motor mount frame assembly. These nuts will be reused in the
Figure 4B Remove Hardware
Advertising