Grain Systems PNEG-1499 - Manual (Page 6)

6 PNEG-1499 High / Low Thermostat
WEAR PROTECTIVE CLOTHING
Wear close fitting clothing and safety equipment
appropriate to the job.
Ear Plugs or Muffs should be worn at all times to
protect ears from high noise levels.
Safety glasses should be worn at all times to protect
eyes from debris.
Wear gloves to protect your hands from sharp edges
on plastic or steel parts.
A respirator may be needed to prevent breathing
potentially toxic fumes and dust.
Wear hard hat and steel toe boots to help protect
your head and toes from falling debris.
Eye Protection
Gloves
Steel Toe
Boots
Respirator
Hard Hat
INSTALL & OPERATE ELECTRICAL
EQUIPMENT PROPERLY
Electrical controls should be installed by a qualified
electrician and must meet the standards set by the
national electrical code and all local and state
codes.
Disconnect and lock out all power sources before
installing wires/cables or servicing equipment .
Hearing Protection
INSTALL & OPERATE GAS-FIRED
EQUIPMENT PROPERLY
Fuel supply should be installed by a qualified gas
technician and must meet local and state codes for
gaseous fuel supplies.
Disconnect and lock out all fuel sources before
servicing equipment .
SAFETY