Grain Systems PNEG-1181 - Manual (Page 6)

6 PNEG-1181 Portable Dryer Troubleshooting
1. Safety
Dryer Safety Instructions and Information
Thank you for choosing a GSI Network Portable Grain Dryer. It is designed to provide excellent
performance and service for many years.
This manual refers to the troubleshooting of the Network Dryer models. Different models are available
for liquid propane or natural gas fuel supply, with either single phase 230 volt, or three phase 230, 460,
575 volt electrical power. (Also 380 volt 50 Hz).
The GSI Group recommends contacting the local power company and having a representative survey
the installation so that wiring is compatible with the system and adequate power is supplied.
Our foremost concern is your safety and the safety of others associated with this equipment. We want
to keep you as a customer. This manual is to help you understand safe operating procedures and some
problems which may be encountered by the operator and other personnel.
As owner and/or operator, it is your responsibility to know what requirements, hazards and precautions
exist, and to inform all personnel associated with the equipment or in the area. Safety precautions may
be required from the personnel. Avoid any alterations to the equipment. Such alterations may produce
a very dangerous situation, where SERIOUS INJURY or DEATH may occur.
This equipment shall be installed in accordance with the current installation codes and applicable
regulations which should be carefully followed in all cases. Authorities having jurisdiction should be
consulted before installations are made.
Figure 1A