Cobalt Digital COMPASS 9083 HD_SD Frame Sync - Manual (Page 32)

2
Installing the 9083 Into a Frame Slot
2-2 9083 PRODUCT MANUAL 9083-OM (V4.5)
Figure 2-1 9083 AES I/O (1-4) Mode Switches
Installing the 9083 Into a Frame Slot
CAUTION
Heat and power distribution requirements within a frame may dictate specific
slot placement of cards. Cards with many heat-producing components should
be arranged to avoid areas of excess heat build-up, particularly in frames
using only convection cooling. The 9083 has a moderate power dissipation
(15 W max.). As such, avoiding placing the card adjacent to other cards with
similar dissipation values if possible.
CAUTION
Rear of Card
S11 S12 S13 S14 INPUT MODE
(Factory Default)
OUTPUT MODE
AES I/O 1
AES I/O 2
AES I/O 3
AES I/O 4
• • • •
This device contains semiconductor devices which are
susceptible to serious damage from Electrostatic
Discharge (ESD). ESD damage may not be immediately
apparent and can affect the long-term reliability of the
device.
Avoid handling circuit boards in high static environments
such as carpeted areas, and when wearing synthetic fiber
clothing. Always use proper ESD handling precautions
and equipment when working on circuit boards and
related equipment.