Cobalt Digital COMPASS 9083 HD_SD Frame Sync - Manual (Page 49)

9083-OM (V4.5) 9083 PRODUCT MANUAL 3-7
Operating Instructions
Checking 9083 Card Information
Checking 9083 Card Information
The operating status and software version the 9083 card can be checked using
DashBoard™ or the card edge control user interface. Figure 3-4 shows and
describes the 9083 card information screen using DashBoard™ and accessing
card information using the card edge control user interface.
Note: Proper operating status in DashBoard™ is denoted by green icons for the sta-
tus indicators shown in Figure 3-4. Yellow or red icons respectively indicate
an alert or failure condition. Refer to Troubleshooting (p. 3-54) for corrective
action.
Figure 3-4 9083 Card Info Utility
The Tree View shows the cards seen by DashBoard™.
In this example, Network Controller Card MFC-8320-N
(serial number ...8053) is hosting a 9083 card in slot 6.
Software Version Number
Refer to this number to check that documentation
(such as this manual) matches the card’s Software
Version Number. Use this number also when
communicating to Cobalt
®
regarding this card.
Status Displays
These displays show the status the signal being received by
the 9083. Green Settings icon shows that any changes made
on DashBoard™ are sucessfully saved on the card’s memory.
9083_CARD_INFO.PNG
Power Consumption and Temperature Displays
This display shows the power consumed by the 9083
for both the +12V and -7.5V rails, as well as key device
temperatures.