Cobalt Digital COMPASS 9083 HD_SD Frame Sync - Manual (Page 37)

9083-OM (V4.5) 9083 PRODUCT MANUAL 2-7
Installation and Setup
Installing a Rear I/O Module
RM20-9083-B Provides the following connections:
• HD/SD-SDI coaxial input (SDI IN)
• Six analog balanced audio inputs (AN-AUD IN 1
thru AN-AUD IN 6)
• Two buffered SDI coaxial outputs (SDI OUT 1 and
SDI OUT 2)
RM20-9083-C Provides the following connections:
• HD/SD-SDI coaxial input (SDI IN)
• Four AES I/O coaxial input/outputs (AES I/O 1 thru
AES I/O 4; I/O function of each connection is
user-configurable)
• Two dedicated AES coaxial audio inputs (AES IN 5
and AES IN 6)
• Two dedicated AES coaxial audio outputs
(AES OUT 1 and AES OUT 2)
• Eight analog balanced audio inputs (AN-AUD IN 1
thru AN-AUD IN 8)
• Two buffered SDI coaxial outputs (SDI OUT 1 and
SDI OUT 2)
Note: For AES I/O 1 and AES I/O 2 on
RM20-9083-C Rear I/O Module to function as
inputs, AES I/O switches S11 – S12 must be
set to Input (factory default).
See Setting I/O Switches for AES I/O (1-4)
Ports (p. 2-1) for more information.
Note: AES OUT 1 and AES OUT 2 on RM-9083-C
Rear I/O Module always function as outputs
regardless of whether AES I/O 1 or
AES I/O 2 are used as inputs or outputs.
Table 2-1 9083 Rear I/O Modules — continued
9083 Rear I/O Module Description