Cobalt Digital COMPASS 9083 HD_SD Frame Sync - Manual (Page 74)

3
9083 Function Submenu List and Descriptions
3-32 9083 PRODUCT MANUAL 9083-OM (V4.5)
Dolby Decoder
(9083-DEC only) Routes a Dolby
®
encoded pair to the
Dolby
®
decoder, and provides Dolby
®
configuration
display and metadata handling controls.
Note: • The Dolby tab controls described here appear only on card equipped with Dolby Decoder option (-DEC).
• If necessary, see Dolby
®
E Processing and Routing Example on page 3-52 for an example of using and routing
Dolby
®
decoding.
• Decoded channels shown in DashBoard™ correlate to typical channel designations as shown below. Note that
channel designations are a function of encoding. Based on encoding, actual channel designations may vary from the
examples shown here.
• See other important notes in this subsection regarding the proper use of metadata embedding tools
available with the decoder function.
• AES Pair as Input AES Pair 1 thru AES Pair 8 range in Input Select drop-down list selects
an AES Pair (1 thru 8) to be the input for the Dolby
®
decoder.
(In this example, AES Pair 1 is the input for the Dolby ® decoder)
• Embedded Channel Pair as Input Embedded Ch 1+2 thru Ch 15+16 range in Input Select drop-down list
selects an embedded channel pair (1+2 thru 15+16) to be the input for the
Dolby
® decoder.
(In this example, embedded channel pair 1+2 is the input for the Dolby ®
decoder)
• Decoder Mode Using the drop-down list, selects the action to take in presence or
absence of Dolby
® E or Digital source from the choices shown on the left.
Table 3-2 9083 Function Submenu List — continued
Decoder Channels E5.1+2 E7.1+2 E8x1
Ch 1 LF LF Ch 1
Ch 2 RF RF Ch 2
Ch 3 C C Ch 3
Ch 4 LFE LFE Ch 4
Ch 5 LS LS Ch 5
Ch 6 RS RS Ch 6
Ch 7 Aux 1 LB Ch 7
Ch 8 Aux 2 RB Ch 8
Mix 1 Lo Lo Mono Mix 1
Mix 2 Ro Ro Mono Mix 2
•
•
•
•
•
•