Cobalt Digital FUSION 3G 9931-EMDE 3G_HD_SD-SDI Embedder_De-Embedder - Manual (Page 11)

9931-EMDE-OM (V1.15) 9931-EMDE PRODUCT MANUAL 1-7
Introduction
9931-EMDE Functional Description
9931-EMDE Video and Audio Options
In addition to the I/O options described in Table 1-1 above, the 9931-EMDE
offers several video and audio options described in Table 1-2. Note that
several options also require a rear I/O option that supports the video and/or
audio options described here; the complete option requirement is specified in
Table 1-2.
SDI OUT A 3G/HD-SD-SDI BNC video output Standard
❑
Various Rear Modules offer various
SDI BNC output complements.
See 9931-EMDE Rear Modules
(p. 2-7) for more information.
Note: The input/output complement listed above and shown in Figures 1-2 and 1-5 represents the maximum capability of the
9931-EMDE. The practical input/output complement is determined by the particular Rear Module used with the 9931-EMDE.
Not all options are available concurrently on a single card.
Table 1-1 9931-EMDE Video/Audio Signal Types — continued
Signal ID Description
Option/Rear Module
Package Required
Table 1-2 9931-EMDE Video/Audio Options
Option Description
Option/Rear Module Package
Required
Note: Options are periodically added for this card. Check for latest options on the card web page at cobaltdigital.com. Most
options, in addition to licensing, require that card be loaded with the latest available firmware.
Video Options
Color Correction In addition to standard video proc controls,
provides independent RGB channel controls
for luma, black, and gamma. • Option +COLOR
Audio Options
Linear Acoustic
®
Loudness
Processing software
Linear Acoustic
®
AEROMAX
®
5.1-channel or
stereo audio output loudness processing;
several combinations available
• Option +LP51 (5.1-Ch loudness
processing)
• Option +2LP20 (dual independent
stereo loudness processing)
• Option +LP20 (stereo loudness
processing)
OGCP Loudness Meter
software
(Note 1) 5.1-channel loudness meter in accordance with
EBU R128, ATSC A/85 and ITU BS.1770.
Allows OGCP-9000 to provide user interface. • Option +LM
Linear Acoustic
®
Upmixing
software
(Note 2)
Linear Acoustic
®
AUTOMAX™ converts legacy
stereo program audio (from any source
received by the card) to 5.1-channel audio.
• Option +UM
Automatic Downmixing Provides a stereo downmix from selected
alternate multi-channel sources if selected
primary L/R channels lose signal. • Option +ADM