Troubleshooting, Error and failure indicator overview, Troubleshooting -62 – Cobalt Digital FUSION 3G 9931-EMDE 3G_HD_SD-SDI Embedder_De-Embedder User Manual
Page 114: Error and failure indicator overview -62, Troubleshooting (p. 3-62)
3
Troubleshooting
3-62
9931-EMDE PRODUCT MANUAL
9931-EMDE-OM (V1.15)
Troubleshooting
This section provides general troubleshooting information and specific
symptom/corrective action for the 9931-EMDE card and its remote control
interface. The 9931-EMDE card requires no periodic maintenance in its
normal operation; if any error indication (as described in this section) occurs,
use this section to correct the condition.
Error and Failure Indicator Overview
The 9931-EMDE card itself and its remote control systems all (to varying
degrees) provide error and failure indications. Depending on how the
9931-EMDE card is being used (i.e, standalone or network controlled through
DashBoard™ or a Remote Control Panel), check all available indications in
the event of an error or failure condition.
The various 9931-EMDE card and remote control error and failure indicators
are individually described below.
Note:
The descriptions below provide general information for the various status and
error indicators. For specific failures, also use the appropriate subsection
listed below.
• Basic Troubleshooting Checks (p. 3-66)