Accessing the 9931-emde card using a cobalt, Operating instructions, Remote control panel – Cobalt Digital FUSION 3G 9931-EMDE 3G_HD_SD-SDI Embedder_De-Embedder User Manual
Page 59: Press the
9931-EMDE-OM (V1.15)
9931-EMDE PRODUCT MANUAL
3-7
Operating Instructions
Accessing the 9931-EMDE Card via Remote Control
Accessing the 9931-EMDE Card Using a Cobalt
®
Remote Control Panel
Press the
Select Device
key and select a card as shown in the example below.
Card Access/Navigation
Tree Pane
Card Info
Pane
Card Function Submenu
and Controls Pane
DB_ACCESS.PNG
This display shows the list
order number of the device that
is ready for selection
This display shows the devices assigned to the Control Panel.
• Rotate any knob to select from the list of devices. The device selected using a knob
is displayed with a reversed background (in this example,
“1 9931-EMDE - Receiver 21 Input Processing”).
• Directly enter a device by entering its list number using the numeric keypad, and
then pressing Enter or pressing in any knob).
3366_3392.JPG