Cobalt Digital FUSION 3G 9931-EMDE 3G_HD_SD-SDI Embedder_De-Embedder - Manual (Page 12)

1
9931-EMDE Functional Description
1-8 9931-EMDE PRODUCT MANUAL 9931-EMDE-OM (V1.15)
Video Subsystem Description
Note: Descriptions below include some functions and features that are available
only as options.
Video Processor
The 9931-EMDE provides full color processing control (luma gain and lift,
chroma saturation, and color phase) of the output video. The color correction
option (
+COLOR ) provides independent RGB channel controls for luma,
black, and gamma. The color correction function converts the YCbCr SDI
input video to the 4:4:4 RGB color space (where the color correction is
applied), and then back to YCbCr SDI on the output of the function. Controls
are available to adjust each RGB level independently for both white levels
(gain) and black levels (offset). Gamma can also be independently adjusted
for each RGB channels. Various controls can be ganged to provide adjustment
for all three color channels simultaneously.
Automatic Audio Failover Provides failover to alternate (“secondary”)
channels to substitute for the primary channels
in the event of audio signal loss. • Option +AFO
Dolby
®
E/AC-3 Decoding Provides Dolby
®
E and/or AC-3 decoding from
embedded and AES sources.
• Option +DEC
❑ If serial metadata Rx/Tx support is
needed, requires Rear Module
with RS-485 port
Dolby ® Digital (AC-3),
Digital Plus™ Encoding
Provides Dolby ® AC-3 encoding from any
audio source used by the card (including mixed
and loudness-processed audio).
Accommodates internally generated and
external metadata.
• Option +ENCD
❑
If serial metadata Rx/Tx support is
needed, requires Rear Module
with RS-485 port
Dolby
®
E Encoding Provides Dolby
®
E encoding from any audio
source used by the card (including mixed and
loudness-processed audio). Accommodates
internally generated and external metadata.
• Option +ENCE
❑ If serial metadata Rx/Tx support is
needed, requires Rear Module
with RS-485 port
Notes: 1. This option must be used in conjunction with a Cobalt ® OGCP-9000 Remote Control Panel. The control panel serves as the
control/display portal.
2. Option +UM can be used in conjunction with Loudness Processing options.
Table 1-2 9931-EMDE Video/Audio Options — continued
Option Description
Option/Rear Module Package
Required