OMAX 60120 JetMachining Center - Manual

OMAX 60120 JetMachining Center
The small-footprint bridge-style OMAX 60120 JetMachining Center is fast and accurate, ideal for a wide range of machining
needs, with one of the lowest cost per part in the industry. The large table can cut stock up to 5’ x 10’, creating complex parts out
of almost any material. Challenging hard, reflective, and nonconductive materials can also be cut, making the 60120 a valuable
addition to existing shop capabilities. Accessories such as the Tilt-A-Jet
® for taper-free edges, A-Jet ® for 3D cutting, and the Rotary
Axis for 6-Axis machining increase versatility. The easy-to-use Intelli-MAX Software and the 60120 take you quickly from idea to
reality.
FEATURES BENEFITS
• Fastest cutting speeds and best precision compared to any abrasivejet in
the industry and is backed by our exclusive Intelli-MAX ® Software with real
world cutting data
• Programmable Motorized Z-Axis with a precision OMAX MAXJET ® 5i Nozzle
Assembly can boost cutting productivity and process efficiency
• Tilt-A-Jet taper compensating abrasivejet cutting head
(available as an option)
• Patent-pending Intelli-TRAX ® traction drive inside the X-Axis beams fully
enclosed inside coated steel covers
• Scissor-style hard plumbing for low maintenance and high reliability
• Drive system sealed against water, dirt, and grit
• Highly efficient, industry-proven Generation 4 EnduroMAX ® Pumps available
up to 100 hp with operating efficiencies up to 90%
• Rapid Water Level Control for quiet and clean submerged cutting
• Bulk Abrasive Feed Assembly transports garnet from the assembly’s large
hopper into the Zero Downtime Hopper located at the Motorized Z-Axis
• Optional Variable Speed Solids Removal System (VS-SRS) designed for
tough industrial use increases uptime through automated solids removal
• Shipped as a completely pre-assembled and factory-tested system
• Machines a wide range of materials and thicknesses, from metals to glass
• Does not create heat-affected zones or mechanical stresses
• No tool changes and minimal fixturing reduces setup by 50% or more
• No additional water required for pump cooling
• Small, efficient footprint for minimal floorspace utilization
• Leaves behind a satin-smooth edge, reducing secondary operations
• No noxious gases, liquid and oils used in, or caused by, the machining process
• EnduroMAX pump technology delivers the highest nozzle horsepower in the
industry for faster and more efficient cutting
• Completes most work below 80 dBA at one meter for submerged cutting
• Environmentally “green” system with quiet and clean operation with low
electrical consumption
• Highly robust and reliable pump design capable of over 1000 hours
between maintenance
PRECISION ABRASIVE WATERJET SYSTEMS
60120
Made in the USA WWW.OMAX.COM