OMAX Tilt-A-Jet - Manual

PRECISION ABRASIVE WATERJET ACCESSORIES
Accessory Specifications
TILT-A-JET
OMAX
®
Tilt-A-Jet
TILT-A-JET
The OMAX Technology
Guarantee entitles you, as
the original owner, to free
OMAX software upgrades
for the life of the machine.
The industry’s premier precision abrasive
cutting head.
The Tilt-A-Jet lets the OMAX ® JetMachining ®
Center achieve virtually zero taper with most
materials. The Tilt-A-Jet can position the nozzle
at an angle calculated by the software to exactly
offset the natural taper from the abrasivejet.
Taper doesn’t disappear—it just gets moved to
the scrap part of the material, leaving your part
with square, taper-free edges.
OMAX Corporation
21409 72nd Ave South, Kent, WA 98032
253-872-2300
tel 253-872-6190 fax
1-800-838-0353 toll-free
WWW.OMAX.COM website
Printed in the U.S.A © August 2010 All rights reserved. S-0020
About OMAX
OMAX is the leader in designing and
manufacturing precision abrasive waterjet
machining equipment. For more informa-
tion on what other OMAX products and
accessories can do for you, call us today.
Standard Features
• Automatic taper reduction without
any programming
• Advanced taper removal
• Programmable tilt up to ±9° for the
maximum tilt angle
• Can be used on all OMAX machines
• Six inches travel in Z direction
• Automatic re-squaring feature ensures
nozzle is square to the part being cut
• Servo-controlled programmable
precision Z-axis
Benefits
• Makes interlocking pieces, dove tail
fittings, and lead ins without taper
• Reduces secondary machining
Requirements
• Standard Windows ® controller
Complete view
shown here in
isometric drawing.
For more informa-
tion contact OMAX
technical support.
Specifications
subject to change.
®
®
C o r p o r a t i o n