OMAX 80X Series JetMachining Center User Manual
Omax 80x series jetmachining, Center, 80x series
OMAX 80X SERIES JETMACHINING
®
CENTER
The OMAX 80X Series is a robust and reliable abrasive waterjet system available in several length variants designed for your
Series employs the innovative patent-pending Intelli-TRAX® linear drive technology designed exclusively for the abrasive waterjet
FEATURES
BENEFITS
•
Highest cutting speeds and best precision compared to any abrasivejet in
the industry and is backed by our exclusive Intelli-MAX
®
Software with real
world cutting data
•
Programmable Motorized Z-Axis with a precision OMAX MAXJET
®
5i Nozzle
•
Increase machining capacity with optional DualBRIDGE system
•
Low maintenance, high reliability scissor-style hard plumbing
•
Drive system sealed against water, dirt, and grit.
•
40, and 50 hp with operating pressures up to 60,000 psi
•
Rapid Water Level Control for quiet and clean submerged cutting
•
Bulk Abrasive Feed Assembly transports garnet from the assembly’s large
hopper into the Zero Downtime Hopper located at the Motorized Z-Axis
•
Shipped pre-assembled and factory-tested
•
Machines a wide range of materials and thicknesses, from metals to glass
•
Does not create heat-affected zones or mechanical stresses
•
•
No additional water required for pump cooling
•
•
Leaves behind a satin-smooth edge, reducing secondary operations
•
No noxious gases, liquid and oils used in, or caused by, the machining process
•
EnduroMAX pump technology delivers the highest nozzle horsepower in the
•
Completes most work below 80 dBA at one meter for submerged cutting
•
Environmentally “green” system with quiet and clean operation with low
electrical consumption
PRECISION ABRASIVE WATERJET SYSTEMS
80X SERIES
Made in the USA
WWW.OMAX.COM
OMAX Corporation is approved by Underwriters Laboratories (UL) to apply the cULus Listed Mark to industrial control panels built by OMAX at their Kent, WA facility per UL 508A,
CAN/CSA C22.2 No. 14, and CAN/CSA C22.2 No. 73. The cULus Listed Mark designates products evaluated by UL and approved for use in the United States and Canada.