OMAX Laser Feature Finder Kit - Manual

PRECISION ABRASIVE WATERJET ACCESSORIES
Accessory Specifications
Laser Feature
Finder
OMAX
®
Laser Feature Finder Kit
Laser Feature Finder
Standard Features
• Easily attachable to all OMAX
JetMachining ® Centers
• Includes a polarized lens to adjust
the diameter of the laser dot to focus
on any size material feature
• With its simple design, the accessory
operates on three A76 batteries,
eliminating wiring or cabling
Benefits
• Easy to use
• Assists in finding tiny details on your
material stock
• Promotes the ability to get the best
yield out of materials
Note: This accessory is not for use
during cutting operations. It does not
replace the Precision Optical Locator.
Perform simple dry runs with this laser attached
to the nozzle before you cut parts on valuable
stock.
Get a rough visual reference of where your jet
stream will begin cutting by locating material
features without special software. The accessory
projects a laser dot within ±0.020" of the area
you plan to cut. The laser also gives you the
capability to easily locate features when your
material is positioned at an angle.
C o r p o r a t i o n
OMAX Corporation
21409 72nd Ave South, Kent, WA 98032
253-872-2300
tel 253-872-6190 fax
1-800-838-0343 toll-free
WWW.OMAX.COM website
Printed in the U.S.A © October 2010 All rights reserved. S-0051
About OMAX
OMAX has the industry leading patented
abrasivejet controller with a built-in expert
system. Our exclusive “Compute First-
Move Later” motion control system
automates most programming and tool
setup work, virtually eliminating the need
for extensive operator training. Plus,
with free OMAX Intelli-MAX
® Software
upgrades for the life of the machine and
our ongoing commitment to advance the
efficiency of our technology and software,
OMAX saves you time and money.
The OMAX Technology
Guarantee entitles you, as
the original owner, to free
OMAX software upgrades
for the life of the machine.