Rainbow Electronics GM862-QUAD-PY - Manual (Page 38)

GM862-QUAD / PY Software User Guide
1vv0300747 Rev. 3 - 10/07/07
Reproduction forbidden w ithout Telit Communications S.p.A. w ritten authorization - All Rights Reserved page 38 of 96
where:
<index> is the index number of the desired PB record to be deleted.
•
wait for response:
Response Reason Action
OK Record has been successfully
deleted proceed ahead
ERROR some error occurred Enable extended result codes
(see par. 2.5.2.1), and retry.
+CME ERROR: 21 invalid index, out of PB storage
limits check index number and retry.
+CME ERROR: 10 SIM not present Check SIM or require SIM
insertion and repeat from par.
2.5.2.2
+CMS ERROR: 310 SIM not present Check SIM or require SIM
insertion and repeat from par.
2.5.2.2
+CME ERROR: 11 SIM is present and PIN is
required to continue operations insert SIM PIN (see par.
2.5.2.3)
+CMS ERROR: 311 SIM is present and PIN is
required to continue operations insert SIM PIN (see par.
2.5.2.3)
+CME ERROR: 12 SIM is present and PUK is
required to continue operations insert SIM PUK (see
par.2.5.2.4)
+CMS ERROR: 316 SIM is present and PUK is
required to continue operations insert SIM PUK (see
par.2.5.2.4)
+CME ERROR: 13 SIM defect Check SIM insertion or require
a new SIM not defected and
repeat from par. 2.5.2.2
+CMS ERROR: 313 SIM defect Check SIM insertion or require
a new SIM not defected and
repeat from par. 2.5.2.2
+CME ERROR: 14 SIM is busy retry later
+CMS ERROR: 314 SIM is busy retry later
+CME ERROR: 15 SIM is wrong type Check SIM, it must be a GSM
SIM.
+CMS ERROR: 315 SIM is wrong type Check SIM, it must be a GSM
SIM.
TIP: The delete operation simply overwrites the record number <index> with an empty record.
If the record to be deleted was already empty, no error messages will be shown, but it will be
only filled again with empty values.