Rainbow Electronics GM862-QUAD-PY - Manual (Page 66)

GM862-QUAD / PY Software User Guide
1vv0300747 Rev. 3 - 10/07/07
Reproduction forbidden w ithout Telit Communications S.p.A. w ritten authorization - All Rights Reserved page 66 of 96
"29/06/02,02:20:00+1"
- Protocol ID implicit (SMS sent to a mobile terminal) corresponding to a value 0.
- Data Coding Scheme:
- Default Alphabet
- Class 0 (e.g. immediate display SMS)
Corresponding to the binary number 11110000 corresponding to the integer 240.
command:
AT+CSMP= 57,29/06/02,02:20:00+1,0,240
response:
OK
3.5.1.6 Select SMS Memory and check for memory space
There are various types of storage where the SMS can be stored, the Telit GM862-QUAD / PY
provides two different storage:
"ME" - mobile equipment memory
"SM" - SIM Card memory
The SMS are usually stored (this is true for both the originated and the received SMS) in the SM
storage, the "ME" storage is a read only one where the Class 0 messages received are stored
(regardless of the selected active storage which may be "SM").
For this reason the "ME" storage can be selected to read the Class 0 messages.
The GM862-QUAD / PY allows the user to select a different storage for the read-delete, write-send,
and reception-saving SMS operations.
•
send command
AT+CPMS=<memr>,<memw>,<mems><cr>
where:
<memr>: memory storage for Read and Delete commands
- "SM"
- "ME" (No Delete operations allowed)
<memw>: memory storage for Write and Send commands
<mems>: memory storage for new incoming message saving
- "SM" only
•
wait for response in the format:
+CPMS:<usedr>,<totalr>,<usedw>,<totalw>,<useds>,<totals>
OK
where
<usedr> - number of SMS stored into <memr>
<totalr> - max number of SMS that <memr> can contain
<usedw> - number of SMS stored into <memw>