B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 117)

Airborne Enterprise CLI Reference Manual 117
del-eth-route
Command del-eth-route
Arguments [tcp | udp | icmp | bcast | all] [ip XXX.XXX.XXX.XXX] [port <integer>]
Security
Level
3 (config)
Device Type Ethernet
Default <none>
Description Deletes the rule matching the defined parameters from the current firewall rules. All parameters must
match for the rule to be deleted.
tcp|udp|icmp|bcast|all Selects the protocol for the rule.
ip xxx.xxx.xxx.xxx
Defines the public network address the rule applies to.
The xxx.xxx.xxx.xxx must represent a valid IP address,
where xxx is an integer between 0 and 255, and that the
resultant IP address is not 0.0.0.0.
port <integer>
Defines the port number for the rule.
The port number must be an integer.
The following provides details for each of the parameters:
icmp The rule impacts only ICMP traffic
tcp The rule impacts only TCP/IP traffic.
udp The rule impacts only UDP traffic.