B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 219)

Airborne Enterprise CLI Reference Manual 219
wl-ant
Command wl-ant
Arguments 1 | 2
Security
Level
3 (config)
Device Type All
Default 2
Description Determine the antenna settings for transmit and receive.
1 Selects ANT1 for transmit and receive.
2 Selects ANT2 for transmit and receive.
wl-ap-max-clients
Command wl-ap-max-clients
Arguments [Integer]
Security
Level
3 (config)
Device Type All
Default 10
Description The maximum number of associated clients when in Access Point mode.
If additional clients try to associate after the maximum is reached, they will be rejected.
The range is 1 - 10.
wl-assoc-backoff
Command wl-assoc-backoff
Arguments [Integer] Range: 0 -20000
Security
Level 3 (config)
Device Type All
Default 10000
Description The amount of time in milliseconds to backoff, after the number of failed association attempts defined
by the wl-assoc-retries command has been reached.
Range 0 - 20000 milliseconds (0 to 20 seconds)