B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 187)

Airborne Enterprise CLI Reference Manual 187
putget-any
Command putget-any
Arguments [integer1] [integer2] [ASCHEX]
Security
Level
2 (data)
Device Type All
Default <none>
Description Performs a binary <aschex> data transfer to a target server or to the CLI Session on a serial interface.
The operation waits for <integer1> bytes of returned data or times out after <integer2> seconds.
Excess bytes are discarded. After the command completes, the connection remains in CLI Mode.
The command can only be issued from a LAN application and uses the first serial interface in Listen mode.
integer1 Maximum number of bytes: range 0 – 1800
Integer2 Timeout in seconds. 32 bit unsigned.
ASCHEX Data to be sent, up to maximum length of the command line.
putget-p2
Command putget-p2
Arguments [integer1] [integer2] [ASCHEX]
Security
Level 2 (data)
Device Type All
Default <none>
Description Performs a binary <aschex> data transfer to a target server or to the CLI Session on the Serial 2 (UART2)
interface.
The operation waits for <integer1> bytes of returned data or times out after <integer2> seconds.
Excess bytes are discarded. After the command completes, the connection remains in CLI Mode.
The command can be issued from a LAN application (serial in Listen Mode) or from a Serial Host
application.
integer1 Maximum number of bytes: range 0 – 1800
Integer2 Timeout in seconds. 32 bit unsigned.
ASCHEX Data to be sent, up to maximum length of the command line.