B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 199)

Airborne Enterprise CLI Reference Manual 199
speedlink
Command speedlink
Arguments enable | disable
Security
Level
3 (config)
Device Type All
Default enable
Description Enables or disables the Speedlink roaming feature of the radio.
enable Enable Speedlink roaming.
disable
Disable Speedlink roaming (wpa_supplicant is responsible for
roaming decisions).
ssh-default-password
Command ssh-default-password
Arguments [ASCII Text]
Security
Level 3 (config)
Device Type All
Default <none>
Description Configures the default password used to establish an SSH connection when the pass or serial
default pass
is used.
Use CLI command clear ssh-default-password to remove password if not needed.
Maximum of password is 32 ASCII characters.
Must not use spaces.