Pw-wpa-psk, Radio-off, Radio-on – B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual User Manual
Page 190

190
Airborne Enterprise CLI Reference Manual
pw-wpa-psk
Command
pw-wpa-psk
Arguments
[ASCII Text string]
Security
Level
Write only: 3 (config)
Device Type All
Default
<none>
Description
Configures the Pre-Shared Key used with WPA-PSK security.
The input range is 8 to 63 ASCII characters or 64 hex characters.
This key must match the key on the AP.
radio-off
Command
radio-off
Arguments
none
Security
Level
3 (config)
Device Type All
Default
none
Description
Disables the 802.11 radio.
After the command is issued the device server will close all TCP/IP and UDP connections and power
down the radio. When in this state the device server will no longer be associated with a wireless
network and any network based communication will not be possible.
The device server will lose connection to the wireless network when this command is
issued.
radio-on
Command
radio-on
Arguments
none
Security
Level
3 (config)
Device Type All
Default
none
Description
Enables the 802.11 radio.
The radio will attempt to regain a wireless network connection.