American Car Craft Corvette Inner Fender Covers Polished 4Pc 2006-2013 Z06 only User Manual
American Car Craft For the car

AMERICAN CAR CRAFT INSTRUCTIONS
C6 ZO6 CORVETTE 4-pc INNER FENDER COVERS
PART#043018
patent pending
PARTS INCLUDED:
2-long black sheet metal screws
1-9/64
th
drill bit,
1-adhesive promoter
2-attachment pads.
Your new covers come to you with a protective liner. Do not remove liner until
installation is complete.
1. Passenger side installation: Prepare the top surface of the fuse box by
scrubbing first with household isopropyl alcohol until clean. Let dry and
then wipe with adhesive promoter (provided). Drivers’ side installation:
prepare the surface of the brake fluid cap and the water fill cap the same
way you did the fuse box. Next remove the rubber cowl gasket running along
the top of the wiper cowl ridge, simply pull up and off. There is a black A/C
fill point line protruding from the very right side of your radiator shroud;
this aluminum tube must be in a downward position. Achieve this by gently
pushing it by hand until it is facing down. This in no way will damage the
hose and it will create clearance for your new cover.