American Car Craft Corvette Inner Fender Covers Polished 4Pc 2006-2013 Z06 only User Manual

Page 3

Advertising
background image

9. Place the small filler cap cover so that it is flush with the gasket ridge and so

that it covers all holes without covering any part of the hood catch opening.
Make note of its position. Once you are satisfied with the position remove
cover and remove the liner from the attachment pads on the underside of the
cover. Reposition and press firmly to set.



Note: Care must be taken when cleaning your covers. It is a good idea to lightly dust
your covers with a clean soft cloth first in order to prevent any particles from
scratching it. Then wipe (using a new clean soft cloth) with a good quality streak
free glass cleaner.


If any questions occur during installation, please contact American Car Craft at 727

861-1500.

Thank you and enjoy your new purchase.


AMERICAN CAR CRAFT

18924 SAKERA RD HUDSON FL 34667

Phone: 727 861-1500 Fax: 727 861-1520

www.americancarcraft.com

Advertising