Peerless-AV HDS-OWRE-200 - Installation User Manual
Page 12
12 of 22
ISSUED: 08-24-12 SHEET #: 180-9030-1
6-2
DISPLAY
BRACKET
G
A
K
H
G
H
F
fi g. 6.3
fi g. 6.4
fi g. 6.5
Slide universal adapter bracket to the side to expopse the display bracket mounting slots. Attach the mounting
brackets (K), open end of notch facing downward, to the left display bracket with two 1/4-20 x 1/2 socket head
screws (G) and two 1/4-20 nuts (H) as shown in fi g. 6.5.
6-3
Open the wireless receiver enclosure (A) and remove the sub panel assembly as shown in fi g. 6.3. Loosely attach
the large enclosure mounting brackets (K) to the wireless receiver enclosure (A) with two 1/4-20 x 1/2 socket
head screws (G) and two 1/4-20 nuts (H) as shown in fi g. 6.4. NOTE: The enclosure mounting bracket can be
installed with the inside notch facing downward if additional side-to-side adjustment is needed. Position and
tighten the four 1/4-20 x 1/2 socket head screws (G) using 4mm allen wrench (L). Press in two plastic plugs (F)
into holes shown in fi gure 6.4.
A
SUB PANEL
ASSEMBLY