Peerless-AV HDS-IWK-200 - Installation - Manual (Page 11)

11 of 24 ISSUED: 08-23-12 SHEET #: 180-9027-2 10-30-12
Slide universal adapter bracket to the opposite side and align second display bracket with second set of display
mounting holes.
Hand thread screws through the multi-washer, display brackets, enclosure mounting brackets (K) and spacer into
display as shown. Tighten all screws.
Center universal adapter bracket (B) horizontally on back of display as shown in fi gure 1.7.
Tighten two 1/4-20 x 1.25" screws. Reinstall four 1/4-20 x .6" screws using a 5 mm allen wrench into fi xed-stop
position 1 as shown in fi gure 1.8.
fi g. 1.8
FIXED STOP POSITION #1 WITH
1/4-20 x .6" SCREWS
fi g. 1.7
1/4-20 x 1.25" SCREWS
SCREW MULTI-
WASHER
SPACER
T
DISPLAY
BRACKET
1-13
1-14
UNIVERSAL
ADAPTER
BRACKET
UNIVERSAL ADAPTER
BRACKET