Prokit's Industries SS-952B - Manual (Page 9)

8
NOTE:
 Pay attention that tube can not be bent, it may influence of
gas flow
 Absorbed item surface should be smooth, in order to be
sucked.
 Pay attention to prevention of ESD, so as not to damage
the device
11. Change the fuse
 Make sure the equipment is completely isolated from the
main power source before changing the fuse.
 The fuse of the main unit is located at the back of the
equipment, right above the power plug connector.
 Change the blown fuse by unscrewing the fuse holder.
 Replace only with the same fuse type, size, and rating. Use
the table below as reference.
 Keep a spare fuse of the same rating for emergency
purpose.
Location Rating Size
Rear Panel 3A, 250V 5x20mm
Package inclusion
QUANTITY PART DESCRIPTION
1 unit Main Station with Hot Air Gun
4 pc Air Nozzles
1 pc Hot Air Gun Holder
1 pc Vacuum Suction Pen
1 pc IC Popper
1 pc Power Cord
1 pc Instruction Manual