Factory Direct Hardware Hansgrohe 10135 - Manual (Page 2)

2
Starck widespread lavatory faucet
10135XX1
Technical Specification
Maximum water pressure 145 psi
Recommended water pressure 14.5 - 72 psi
Maximum hot water temp. 176 o *
Recommended hot water temp 120 o - 140 o *
Max. flow rate @ 45 psi 2.2 gpm
Max. deck thickness 1 3/8”
Hole size in deck valves 1 1/4”
spout 1 3/8”
Installation considerations:
This unit requires 1/2” supply lines and
nuts, which are not included.
*Many municipalities require that the water heater be set no
higher than 120 o . Please know and follow all
applicable plumbing codes when setting the temperature on
the water heater.
Installation Instructions
• Push the valve up through the hole in
the mounting surface. Thread the
mounting ring with o-ring on as far as
it will go.
• Pull downward on the valve until the
mounting ring is seated firmly on the
countertop. -Tighten the tensioning
screws.