Factory Direct Hardware Hansgrohe 10458 Axor Starck User Manual
Page 2
2
Axor Starck Free-Standing Tub Filler
10458XX1
Technical Specification
Maximum water pressure
145 psi
Recommended water pressure
14.5 - 72 psi
Maximum hot water temp.
176
o
*
Recommended hot water temp
120
o
- 140
o
*
Max. flow rate @ 45 psi
5.8 gpm
Rough-in 10452181 must be installed and the floor finished and made watertight before the tub
filler can be installed.
This tub filler is not anti-scald. If anti-scald capability is desired, or is required by local plumbing
codes, install remote pressure balancing valve 13418181 to the hot and cold supplies before they
go into the 10452181 rough-in.
The handshower is protected against back siphonage with a check valve, located in the hand-
shower outlet on the tub filler. The check valve should be inspected and cleaned yearly.
Tub filler 10458XX1 is listed by Underwriters Laboratories.
*Please know and follow all applicable local plumbing codes when setting the temperature on the water heater