Ocean Optics SpectraSuite - Manual (Page 105)

7: Processing Menu Functions
000-20000-300-02- 201110 93
3. If more than one Absolute Irradiance graph is open, select the desired spectrometer by
highlighting it under Source.
4. Enter the wavelength range to integrate in the Integration Options section.
5. Enter the Integration Method, either Rectangular, Simpson’s (Rule), or Trapezoid.
6. Click when finished. The Energy, Power, Photons table appears to the right of the
graph. You can change these values by clicking the Change icon ( ) in the Energy, Power,
Photons table.
This table is described below:
Attribute Meaning
Source The absolute irradiance source you selected in Step 3.
Start The starting wavelength you selected in Step 4.
End The ending wavelength you selected in Step 4.
Method The integration method you selected in Step 5.