Ocean Optics SpectraSuite - Manual (Page 137)

10: Strip Charts
000-20000-300-02- 201110 125
5. Enter the following data to create your Strip Chart:
Field Selections
Source Select the source of the Strip Chart.
Select one of the following:
Ratio of Wavelength Values
Multiple Trends from this Source
Single Trends from this Source
Displays the Ratiometric Configuration Wizard to help
you to select the wavelength to use as the numerator
and the divisor for the ratio.
Displays a screen to choose multiple trend options
such as number of trends, range selection, compute
derivative, and scale trend value.
Activates the Range Selection field on the lower right
portion of this screen.
Update Rate tab:
Update after every scan
Update after every x scans
Between updates, wait at least
Update with the first scan every
Start at the beginning of the next
Updates the strip chart:
After every scan
After the number of scans selected
After the interval selected between updates
After the first scan, then at the interval selected
At the beginning of each new selected interval