OSRAM ORBEOS Components - Manual (Page 7)

7
OLED INTEGRATION
In this example, elastomeric connectors are used for inter-
connecting OLEDs. Similar low-resistance connectors can
be used accordingly. The product can be acquired from
Nucletron Technologies GmbH, Munich.
The connectors should cover the contact ledges completely to
minimize contact resistance. They have to be compressed by
5 – 25 % of their height to ensure optimal conductivity and
vibration resistance. The carrier of the OLED has to provide a
suffi cient holding force and also has to fi x the connectors late-
rally. To calculate the force needed, consult the datasheet of
the connectors. Keep in mind that the active area of the OLEDs
should not be exposed to mechanical stress.
1.5. Contacting of OLED tiles via elastomeric connectors
Fig. 4. Front side of an ORBEOS ® CMW-031. The elastomeric connectors (light blue) have to be compressed to ensure suffi cient electrical connection.
F